Parkzone PKZU2480 Bedienungsanleitung PDF herunterladen (Seite 8)

Transmitter Control

Digital Trims

The ParkZone® 4-channel DSM2/DSMX transmitter features digital trim buttons on all controls to make

ﬁ ne adjustments. The digital trims are used to ﬁ ne-tune the model’s ﬂ ight path when in ﬂ ight.

Before the ﬁ rst ﬂ ight, center the control surfaces mechanically (see Control Centering).

When pressed down, trim buttons make a sound that increases or decreases in pitch at each pressing.

The middle or neutral trim position is heard as a middle tone in the pitch range of the sounds. The end of

the control range is sounded by a series of beeps.

Dual Rate Function

This transmitter’s dual rate feature lets you change between high and low control rates for the aileron,

elevator and rudder.

• When powered ON, this transmitter is automatically set to high-rate mode.

• Change rate modes by pushing the right-hand control stick vertically into the case (until it clicks)

while the transmitter is powered ON.

• High-rate mode is shown by the transmitter’s LED glowing solid red. In high-rate mode, the controls

can reach their maximum values. This mode is typically preferred by experienced pilots for maximum

control authority.

• Low-rate mode is shown by the transmitter’s LED blinking continuously. In low-rate mode, the

controls are reduced to approximately 70% of their maximum values. This mode is typically preferred

by (and best for) beginner pilots or others interested in smoother and more easily controlled ﬂ ight.

Mode 2

Throttle/Rudder Elevator/Aileron

Rudder Trim Aileron Trim

Throttle Trim Elevator Trim

Mode 1

Elevator/Rudder Throttle/Aileron

Rudder Trim Aileron Trim

Elevator Trim Throttle Trim

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Keine Kommentare

Parkzone PKZU2480 Bedienungsanleitung Seite 8